How to set the PC modem to 9600 baud

When you try to establish a dial-up connection between your PC and an eWON with GSM modem (GSM-Data) then it may be required to force the modem of your PC to 9600 baud.

To do this proceed as follows:
- In the Control Panel open the Phone and Modem Options page.
- Click on the Modems tab, select your modem and click on the Properties button
- Click on the Advanced tab, and enter the AT command in the Extra initialization commands field as shown in the picture hereunder.
    The AT command to use is depending of the modem type installed on your PC. So please refer to the user manual of your modem to get the correct AT string. 
    But most of the time the AT command to use is one of the following:
            +MS=32,0,9600     or
            +MS=V32,1,0,9600,0,9600